Skip to main content Skip to search Skip to main navigation

Description

for untreated, profiled wooden planks released by SIHGA®
we reccomend using TefaFix® T rail as substructure
use with additional locking screw for vertical facade
claddings safeguarding facade profiles from slippage
manufactured, developed, and patented in Austria
highest European quality and value creation
screwed fastening for floorboards only in the joint with the SenoFix® FT, cover- and lateral surfaces of the boards remain unharmed
creating a visually appealing surface is quick, simple and precise
ONLY for timbers tested by SIHGA®
greatest security through long-term testing
expansion mechanism with joint width of 7 mm in final state
no spacers needed for assembly assembly
possible without additional tools
no additional costs for clamps or belts, etc.
connector height per the latest state of the art
automatic spacing from substructure of 8 mm
stabilises and compensates for any swelling and shrinkage in the wood
increases the lifespan of the terrace considerably
only 1 screw per attachment point
requires 50 % less installation time and provides perfect grip
available with two different screw lengths
use on wood and alu substructure
produced of reinforced SIHGAMID®
is therefore permanently heat-, frost- and UV- resistant
attachment screw made of hardened stainless steel
is permanent and break-proof
including SIHGAFIX® stainless steel, all attachment screws and installation instructions
time-saving, practical, precise, all accessories are included, SIHGAFIX® stainless steel prevents extraneous rust
quantity calculation per m2
1:substructure spacing [m]:(board width [m] + joint [m])
HFA inspected in combination with thermo ash

The TerrassenFix® depth limiter TTB prevents the screw from being screwed in too deeply.


To the video

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

  • 38373 Montageanleitung SenoFix FT 08 2024 web PDF, 1,3 MB Download
  • TDB SenoFix FT EN PDF, 367 KB Download
  • Sihga SenoFix-Broschuere 2026-08-05 Web EN PDF, 8,2 MB Download
  • TDB SenoFix FT EN Terrasse PDF, 3,8 MB Download

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account