Skip to main content Skip to search Skip to main navigation

Description

made in Austria
top European quality and added-value
special thread geometry
optimal traction in the end grain
fastens wood to wood, even OSB panels
screw without pre-drilling and pre-sinking
fastens pressure-resistant insulation materials for on-rafter insulation
for insulation with a compressive stress above 50 kPa
screwing permissible from 0° up to 90° to the grain
fastens with all screw-in angles
the splitting effect in the wood is reduced through the special multi-stage head
saves 50 % of storage, combines countersunk head and flat-head; transfers high forces, but can still be countersunk and facilitates screw connections close to the edge
special ribs on the shaft and slip coating
pre-drilling effect, easy rotation, battery-saving
SIHGA® tip
fast setting of the screw, user-friendly and time-saving
including SIHGAFIX®, Systemstift® and installation instructions
time-saving, practical, precise, all accessories enclosed; SIHGAFIX® also enables screwing into deep grooves
SIHGA® Ornamental Washer MSZ for diameter 8 mm
this Ornamental Washer MSZ increases the tensile force of the head to 9.1 kN; very attractive solution
screwing permissible from 0° up to 90° to the grain
fastens with all screw-in angles
design values
SIHGA® performs the calculation for you
Greatest earthquake protection - GoFix® MS II
  • SIHGA® is ahead of its time
    tests already under way for the latest ­revision of Eurocode 5
  • latest tests confirm excellent properties
    ductility ensures safety
  • best ductility class S3 for earthquake resistance
    safety according to prEN 14592
  • simulated earthquake load through cyclic bending of the bolts
    reliable residual load capacity of at least 90 %
GoFix® MS II application by means of impact screwdriver (Tested by the University of Innsbruck)
positive report for processing with impact screwdrivers
GoFix® MS II using in end grain
GoFix® MS II using in hardwood
  • use in hardwood allowed
    safety according to ETA -20/0558
  • extensive application possible by means of pre-drilling
    in solid wood, glued plywood board and laminated veneer wood
  • head pull-through force and thread extension may be increased by the factor k; observe maximum tensile strength according to ETA
    high load capacity for efficient connections

Technical data

Adjustment range (mm)
Anbauteil 12 mm, Anbauteil 14 mm, Anbauteil 16 mm, Anbauteil 18 mm, Anbauteil 20 mm, Anbauteil 24 mm, Anbauteil 28 mm, Anbauteil 30 mm, …
Diameter Ø
4.0 to 10 mm
Drive
TX 15, TX 20, TX 25, TX 30, TX 40, TX 50
Installation Part (mm)
12 to 500
Length (mm)
30 to 600 mm
Material
electro galvanized
Packing unit
Mehrwertpack, Montagepack, Objektpack, Paket
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

  • 38542 Montageanleitung GoFix MS II 4 4,5 5 12 web PDF, 1,1 MB Download
  • 38812 montageanleitung gofix ms II 6 8 10 web PDF, 289 KB Download
  • TDB GoFix MS II EN PDF, 945 KB Download
  • ETA200558 SIHGA GoFix Screws r6 2026 PDF, 2,3 MB Download
  • EPD HUB-2844 2025-03-03 PDF, 2,5 MB Download

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account