Skip to main content Skip to search Skip to main navigation

Description

fastens in concrete without dowels
optimal for fastening close to edges, no splitting effect
easy push-through installation
saves a great deal of time because the BeziFix® Anchor ZF/ZS/ZSS is only pushed through the part to be anchored
drill hole diameter smaller than with expansion anchors
also saves lots of installation time
sawtooth thread in the front
are a makes it easy to screw into the pre-drilled concrete
just tighten by hand to achieve the full load-bearing capacity
does not need a torque wrench
approved with grades C 20/25 to C 50/60 in cracked and non-cracked concrete
there are few restrictions on the application, gives security
includes installation instructions and Stabebo® SDS drill with four-edged geometry specially for reinforced concrete
time-saving, practical, precise, complete accessories enclosed
design values
SIHGA® performs the calculation for you
BeziFix® Anchor ZF with counter-sunk head and Torx drive
Bezifix® Anchor ZS with hex head
BeziFix® Anchor ZSS with hex head and washer DIN 440

ensures optimum force transfer when screwed in

Technical data

Adjustment range (mm)
AD 65 mm, AD 105 mm, AD 145 mm, AD 185 mm, Anbauteil 5 mm, Anbauteil 25 mm, Anbauteil 45 mm, Anbauteil 85 mm, …
Diameter Ø
7.5 to 12.5 mm
Drive
SW 15, SW 17, TX 40
Installation Part (mm)
5 to 225
Length (mm)
40 to 320 mm
Material
electro galvanized
Packing unit
Mehrwertpack, Montagepack, Objektpack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

  • 38702 Montageanleitung BeziFix Anker ZF ZS ZSS 12 web PDF, 229 KB Download
  • TDB BeziFix Anker ZF-ZS-ZSS EN PDF, 387 KB Download
  • ETA-16-0889 en PDF, 3,5 MB Download

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account