Skip to main content Skip to search Skip to main navigation

Description

load attachment for lifting glued laminated timber, glued cross laminate timber and solid timber
capacity up to 2400 kg per fastening point

made, developed and patented in Austria from high-quality steel
local quality and reliability, Q&T steel for permanent, robust long life lift

Pick Max Drill HMB can be combined with the IdeFix® Drill Bell IBG
simple, safe adherence to the drilling depth, exact drilling under 90°.

safe and simple attachment
attached in a few simple steps, no alignment of the sling required

versatile application
face side (from panel thickness of 100 mm), panel side or cross-laminated side for beams of all types

low-maintenance
Annual inspection possible together with personal protective equipment in accordance with the Work Equipment Ordinance

long service life
16,000 load cycles

safety tested – accompanied by TÜV
avoidance of safety risks, diverse application areas and ambient conditions tested

Advantages

  • Payload up to 2400 kg per lashing
  • Versatile use: on the face side, panel side or cross-laminated side for beams of all types
  • The visual quality of the surfaces is not damaged, no fastening screws required
  • Easy and secure attachment, no alignment required
  • Tested safety - accompanied by the TÜV

Instructions for use

The Pick Max® wedges itself so solidly into the borehole that 2,400 kg of payload can be lifted per attachment point.

Technical data

Packing unit
Montagepack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

  • Pick Max Traglasttabellen 2026 Web PDF, 6,5 MB Download
  • TDB Pick Max EN PDF, 234 KB Download
  • 39351 BA Sihga Pick Max 08 2026 Web PDF, 3,0 MB Download

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account