Skip to main content Skip to search Skip to main navigation

Description

Connectors for façade slats on different substructures
Whether wood, steel or concrete, the connector can be fastened to almost any substrate
Node connection made of two identical parts (1 connection consists of 2 pieces)
Can be pre-assembled without confusion and on the slat in the factory
The first connector on the market that enables the simple and cost-efficient installation of  wooden slats
Quick and visually very appealing way to mount wooden slats on façades
Thanks to the ingenious coupling of the connectors by means of a locking screw, LamellenFix mounted in series are loaded equally
The LamellenFix has a high assembly tolerance, as the connection can be made perfectly even with a layer difference (in a longitudinal direction) of up to 8 mm
The geometry of the connector profile ensures that the water drains off quickly
Structural wood protection was always taken into account in the development and thus offers a long construction service life
Developed, patented and manufactured in Austria
Highest European quality and added value
Statically loadable in five directions
horizontally, vertically and under tension with high tested static values
Made of aluminium under monitoring and anodised
Durable, dimensionally stable quality, rust-free
All enclosed screws in stainless steel
Approved for use in NKL 3
Includes SIHGAFIX® and assembly instructions
Time-saving, practical, precise; All accessories are included
The secure connector for achitecturally and statically demanding louvre facades
best suited for slat dimensions of >40 x 65 mm

Technical data

Diameter Ø
36 mm
Length (mm)
80 to 160 mm
Material
SE35
Packing unit
Mehrwertpack, Montagepack, Objektpack, Paket, Stück
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

  • TDB LamellenFix EN PDF, 2,3 MB Download
  • ETA 23-0821 HobaFixMax LamellenFix-en PDF, 1,9 MB Download
  • 38903 Montageanleitung LamellemFix 06 2023 WEB PDF, 1,3 MB Download
  • DoP 230821 05 2026 PDF, 510 KB Download

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account