Skip to main content Skip to search Skip to main navigation

Description

made from A2 stainless steel
characterised by its good corrosion resistance and used in moderately corrosive environments

Multi-start head with small head diameter
high structural wood protection and elegant finish thanks to the flat head
special thread pitch with sharp thread flanks
High pull-out resistance
SIHGA® tip with special shape
guarantees quick screw insertion without splitting
SIHGA® milled ribs on the shank
easy, quick driving and an optimal fit in the wood are guaranteed
includes SIHGAFIX® stainless steel, Systemstift® and assembly instructions
Time-saving, practical, precise; all accessories included; SIHGAFIX® stainless steel prevents external rust and can be screwed into deep grooves

Due to the material properties, it is strongly recommended to pre-drill the mounting part (screw diameter + 0.5–1 mm). Due to the varying bulk densities and moisture content, even in coniferous woods, the substrate must in most cases be pre-drilled with a 3 mm diameter drill bit over the entire length of the threaded shank. If in doubt, we recommend carrying out preliminary tests

Technical data

Adjustment range (mm)
Anbauteil 16 mm, Anbauteil 18 mm, Anbauteil 20 mm, Anbauteil 24 mm, Anbauteil 28 mm, Anbauteil 32 mm, Anbauteil 36 mm, Anbauteil 40 mm
Diameter Ø
4.5 to 5.0 mm
Drive
TX 20, TX 25
Installation Part (mm)
16 to 40
Length (mm)
40 to 100 mm
Material
stainless steel (A2)
Packing unit
Mehrwertpack, Montagepack, Objektpack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account