Skip to main content Skip to search Skip to main navigation

Description

made in Austria
top European quality and added-value
high load bearing wood-concrete connection screw
connects wooden beam ceilings, dowel beam ceilings or panel ceilings and the top concrete layer to optimise the strength with limited structural height
diverse areas of application, economical and cost-effective
old building renovation (strengthening wooden beam ceilings), building height extensions (load-distributing ceilings for attics), new buildings (high load bearing wood-concrete compound structures)
optimises properties of simple wooden ceilings
greater strength and rigidity, fire protection, better vibration behaviour, noise protection, thermal insulation
optimised compared to purely concrete ceilings
low inherent weight, degradable
Hobet® thread
fast screw connection, low tightening torque, minimises splitting effect
Hobet® bit
time savings due to rapid attachment, especially at 45° screw angle, easy to work with
comprehensive calculation of load capacities, fire protection, serviceability and vibration
complicated calculations are superfluous - SIHGA® performs the calculation for you

Technical data

Diameter Ø
8.0 mm
Drive
TX 40 / SW 10
Length (mm)
155 to 205 mm
Material
electro galvanized
Packing unit
Objektpack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account