Skip to main content Skip to search Skip to main navigation

Description

fastens blunt wood connections extremely quickly
transfers high tensile, compressive and shearing forces
made from hardened carbon steel
the permanent, secure and powerful fastening
screwing permissible from 0° up to 90° to the grain
fastens with all screw-in angles
SIHGA® drill bit
for stress-free, easy rotation, enables small edge and axial distances
pre-drilling also permitted, for GoFix® X+ Ø 6.5 mm with 4 mm, with Ø 8.0 mm with 5 mm, with Ø 10.0 mm with 6 mm
for renovating old timber or hard timber
stepless counter sinking screw head with deep, recessed drive
can be countersunk, without splitting effect in the wood and without the drive skipping out of the head
strengthens constructive wood construction
support reinforcements, anchor beams (combined bending girder), notches, transverse force reinforcements can therefore be produced quickly and individually
optimised thread
for lightweight screw connections with low screw-in torque
including SIHGAFIX®, Systemstift® and installation instructions
time-saving, practical, precise, complete accessories enclosed
design values
SIHGA® performs the calculation for you
online calculation
support reinforcement, notches, anchor beam, breakout, main beam - secondary beam connection
Application GoFix® X+ in Plywood Board
  • optimised geometry of the drill bit
    rapid attachment and simultaneous predrilling
  • screwing below 0 ° to the fibre allowed
    can be installed in all layers and angles in plywood board
  • special cylinder head
    infinitely countersinking without splitting effect
  • deep bit punching
    prevents the SIHGAFIX® from slipping out
GoFix® X+ application by means of impact screwdriver (Tested by the University of Innsbruck)
positive report for processing with impact screwdrivers

Technical data

Adjustment range (mm)
Anbauteil 60 mm, Anbauteil 70 mm, Anbauteil 80 mm, Anbauteil 100 mm, Anbauteil 110 mm, Anbauteil 125 mm, Anbauteil 140 mm, Anbauteil 150 mm, …
Diameter Ø
6.5 to 10 mm
Drive
TX 30, TX 40, TX 50
Installation Part (mm)
60 to 300
Length (mm)
120 to 600 mm
Material
electro galvanized
Packing unit
Mehrwertpack, Montagepack, Objektpack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account