Skip to main content Skip to search Skip to main navigation

Description

extremely high thread load-bearing capacity of up to 50 kN and length up to 1000 mm
ideal for reinforcements in timber engineering and for large glued laminated timber beams or for fastening steel parts onto wooden beams, replaces threaded rods
made from hardened carbon steel
the permanent, secure and powerful fastening
additional pre-drilling, with GoFix® SS Ø 11.3 mm with 8.0 mm
for lightweight screw connections with low screw-in torque
including SIHGAFIX® and installation instructions
time-saving, practical, precise, complete accessories enclosed
design values
SIHGA® performs the calculation for you
online calculation
support reinforcement, notches, anchor beam, breakout

Technical data

Adjustment range (mm)
Anbauteil 150 mm, Anbauteil 170 mm, Anbauteil 190 mm, Anbauteil 210 mm, Anbauteil 230 mm, Anbauteil 250 mm, Anbauteil 270 mm, Anbauteil 290 mm, …
Diameter Ø
11.3 mm
Drive
TX 50
Installation Part (mm)
150 to 500
Length (mm)
300 to 1000 mm
Material
electro galvanized
Packing unit
Montagepack, Paket
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account