Skip to main content Skip to search Skip to main navigation

Description

fastens planks invisibly screwed; developed, patented and made in Austria
elegant look and long-lasting fastening
suitable for almost all wood types
reduces fault ratio when delivering the material to the construction site, this saves time and reduces storage costs
made from hardened stainless steel
rust-free fastening, extremely break-proof
planks remain undamaged on all visible surfaces
the timber is screwed from below, this results in a longer lifespan and prevents rot
compensates for the swelling and shrinkage of the wood
reduces the crack and break behaviour of the timber during these natural processes
suitable for all plank widths
only one system for different plank widths
selection of three screw lengths
optimised fastening of the different plank thicknesses from 19 mm
variable adjustment of the visible joint (0 - 15 mm)
suitable for every developer, FugiFix® is the ideal assistant here
connector height with 6 mm for optimal ventilation
ensures optimum constructive wood protection; prevents accumulations of water between the plank and substructure
includes SIHGAFIX® stainless steel from hardened stainless steel, BohrFix® with drill bit and installation instructions
SIHGAFIX® enables screwing in deep grooves and prevents rust from external sources; time-saving, practical, precise, all accessories enclosed
two screw points per DielenFix® on the plank
creates the same stability as when visibly screwed from above, and prevents warping of the timber
with joint spacing ≥8 mm
individual planks can be disassembled or replaced

Technical data

Installation Part (mm)
19 to 30
Length (mm)
17 to 28 mm
Material
stainless steel
Packing unit
Objektpack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

  • 38301 Montageanleitung DielenFix A2 24 web PDF, 2,5 MB Download
  • TDB DielenFix EN PDF, 291 KB Download
  • wood-species DielenFix EN PDF, 480 KB Download

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account