Skip to main content Skip to search Skip to main navigation

Description

The Mass-X® Pull Angle P-HB 340 is a steel sheet moulding especially for timber frame construction for the transmission of tensile forces. It enables simple and quick base point anchoring of timber elements in wood, steel or concrete substrates. The Mass-X® Pull Angle P-HB 340 is particularly stable and can withstand high loads.

Advantages

  • Short bridge height (150 mm)
  • Indirect fastening through an intermediate layer (e.g. OSB)
  • For mounting on wood and concrete
  • Optimised screw pattern for very high tensile load capacities
  • In combination with the pressure plate, the tensile force can be additionally increased

Instructions for use

The Mass-X® Pull Angle P-HB 340 is placed on the planking in the floor area and fastened to the stem and, if necessary, to the threshold with screws or anchor nails. The connection is capable of safely transferring tensile, suction and shear forces via the screws into the Mass-X® Pull Angle P-HB 340 and finally via a dowel into the base plate. Maximum threshold height: 150 mm taking into account the distances to the end timber edge according to EC5.

Technical data

Diameter Ø
63 mm
Length (mm)
340 mm
Material
SM_MASSX
Packing unit
Montagepack
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account