Skip to main content Skip to search Skip to main navigation

Description

fastens wood to wood without pre-drilling and without countersinking
reduces crack formation or splitting of the timbers, even board materials, saves work time, additional pre-drilling extends the life of the wood
also attaches coverings made out of hard and thermo-wood
creates a perfect look, with these woods additional pre-drilling is recommended
multi-stage head with small head diameter
high constructive wood protection and refined surface as a result of the plane head
special thread angle with sharp thread edges
high pull-out value
SIHGA® point with special shape
guarantees fast setting of screws without splitting
SIHGA® ribs on shaft and slip coating
light, fast rotation and optimum fit in the wood are guaranteed
made from hardened stainless steel
rust-free fastening, extremely break-proof
also available with black (SC 9 coating) and antique look (SC 11 coating)
optimum on dark materials, or can be used for larch, Douglas fir and Bangkirai
including SIHGAFIX® stainless steel, Systemstift® and installation instructions
time-saving, practical, precise, all accessories enclosed; SIHGAFIX® stainless steel prevents rust from external sources and also screws into deep grooves
When using coatings such as oils, glazes and pre-greying, it is essential to consult the coating manufacturer. As a rule, the manufacturer specifies the minimum material quality of the binding agent. If the manufacturer is not known, we recommend material quality A4 (L-BohrFix® MB A4).
L-GoFix® MS A2 made from A2 stainless steel
stands out thanks to its good corrosion resistance and is best used in moderate, corrosive environments
Because of the material properties it is strongly advised to generally pre-drill the add-on part (screw diameter + 0.5 -1 mm). The substructure, due to the different bulk densities and moisture, also in conifers, should in most cases be pre-drilled over the entire thread length with Ø 3 mm. If in doubt, we recommend carrying out pretrials

Technical data

Adjustment range (mm)
Anbauteil 12 mm, Anbauteil 14 mm, Anbauteil 16 mm, Anbauteil 18 mm, Anbauteil 20 mm, Anbauteil 24 mm, Anbauteil 28 mm, Anbauteil 32 mm, …
Diameter Ø
4.0 to 6.0 mm
Drive
TX 15, TX 20, TX 25, TX 30
Installation Part (mm)
12 to 90
Length (mm)
30 to 160 mm
Material
hardened stainless steel (C1), hardened stainless steel (C1), black coated
Packing unit
Mehrwertpack, Montagepack, Objektpack, Paket
Stückzahl
1

Installation in four steps

  1. Set up the substructure

    Install Distancer®, maximum joist spacing 50 cm.

  2. Fix the first board

    Fasten the edge board visibly or with a start clip.

  3. Screw in DielenFix®

    From the side at a 45-degree angle through the groove into the substructure.

  4. Slide in the next board

    The spacer ensures an even joint.

Installation images

Assembly Step by step

Installing DielenFix® DF correctly Concealed fastening at a 45-degree angle through the groove
Preparing the substructure Fit Distancer®, maximum joist spacing 50 cm

Downloads

Data for planning and installation

Assembly guide, data sheet, approval, CAD data and specification text for this product.

FAQ

Frequently asked questions about terrace construction

Larch and Douglas fir are affordable and durable, thermally modified wood is particularly dimensionally stable, and hardwoods such as Ipe or Cumaru last the longest but require pre-drilling and A4 stainless steel.

For boards 21 to 28 mm thick, we recommend a maximum of 50 cm, for WPC 40 cm. Distancer® ensures ventilation between the board and the substructure.

As a rule of thumb, with a board width of 145 mm and a joist spacing of 50 cm, you need around 14 fasteners per m². The demand calculator on the product page calculates the exact quantity.

The webshop is reserved for trade businesses. As a homeowner, you can obtain SIHGA systems through our system partners, including advice and installation on request. Find a dealer

Service & contact

We are there when you need us

In person on the phone, on site via dealers and field service – or around the clock in our help centre.

Contact & team

Advice & dealer search

Enter your postcode – find field service and dealers in your region.

Find an advisor

Contact support

+43 7612 74370 0, Mon–Thu 7am–5pm, Fri 7am–12pm – or by email.

Call

FAQ & help

Answers to the most common questions about installation, ordering and products.

To help

Delivery & tracking

Track deliveries, retrieve invoices, register returns.

To account